Mouse is a very important accessory in the use of computers, especially for desktop computers, the mouse once out of order, the computer is almost impossible to operate, so that people are caught off guard. Then next we will share with you about the mouse does not move or slow response, mouse click is invalid, scroll wheel does not work, the mouse pointer moves erratically and the mouse cursor moves abnormally (jumping or shaking) of the mouse common failures and solutions.
1. The mouse does not move or is unresponsive:
·Check the connection: Make sure the mouse's USB port or wireless receiver is properly connected to the computer.
·Replace the battery (wireless mouse): If you are using a wireless mouse, try to replace the battery with a new one.
·Clean the mouse: Clean the optical sensor on the bottom of the mouse and the surface of the mouse pad. Dust and dirt may affect the operation of the mouse.
·Test the mouse: Connect the mouse to another computer and check if the problem persists to determine if the problem is with the mouse itself.
2. Invalid mouse click:
·Check the driver: Make sure the driver for the mouse has been installed or updated correctly. You can check for problems in the device manager.
·Adjust settings: In the mouse settings of the operating system, check for misconfiguration. Especially the double-click speed and click sensitivity settings.
·Replace the mouse: Try using another mouse and see if the problem persists.
3. The scroll wheel does not work:
·Clean the scroll wheel: Use compressed air or a soft cloth to clean the dust around the mouse wheel.
·Check the settings: Make sure that the scroll wheel settings in your system have not been changed accidentally. You can adjust the scrolling distance of the scroll wheel in the mouse settings.
·ATK V HUB Driver update: Make sure your mouse driver is up to date.
4. Unstable mouse pointer movement:
·Check the surface: Use a mouse pad or replace the surface the mouse is used on to make sure it is not reflective or too rough.
·Check the optical sensor: Make sure there is no dust or dirt in the optical sensor area.
·Recalibrate: You can perform mouse recalibration operation in ATK V HUB.
5. The mouse cursor moves abnormally (jumps or shakes):
·Replace the surface: Try using the mouse on a different surface, make sure the surface is clean and flat.
·Check for electromagnetic interference: Some devices may affect the mouse cursor, try to avoid using it in an environment with strong electromagnetic interference.
·Test different USB ports: If you are using a wired mouse, try plugging the mouse into another USB port on your computer.
Thoughtful Exclusive Tips:
·When you replace the original cable in the package with another usable cable, make sure that the cable meets the 8K polling rate and do not use an extension cable.
·After replacing the cable, reset the mouse and receiver to factory settings, and then pair the 8K receiver again, if it still stutters, you can try to adjust the return rate to 4K.
·If you are using a laptop computer, please do not use the extension cable or USB expansion port, and plug it directly into the USB port of your computer.
· If you are using a desktop computer, please plug it directly into the USB 3.0 port on the back of the host computer.
Warm Reminder:
In order to ensure that the ATK mouse 8KHz experience, please first ensure that your computer configuration can meet the following minimum recommended configuration requirements, in order to play the best performance of the mouse.
CPU: Intel Core i7 9700K or above, AMD Rexon 73700X or above.
Monitor: Refresh rate of 240Hz or more
Graphics:NVIDIAGTX1080 or above AMDRX5700 or above
Memory: 16GB or above
Hope suggestions above can help you, if the problem still can't be solved, please contact us again. Thank you for your cooperation and understanding.