King of Magnetism, Who's Up To It?
Magneto, the king of magnetism, is one of the most famous and influential characters in the Marvel movies. Magneto's power is to create and control any form of magnetic field, has superhuman control over magnetic fields and metals, can magnetically strengthen his own body, and his powers can be extended down to the atomic level, allowing him to manipulate chemical structures and transform the world.
The current mainstream mechanical switch feel characteristics, early bottoming, long spring, strong rebound. Strong bottoming out confirmation, crunching sound and concentration. Transplant the above two main characteristics to the magnetic switch. Isn't this a magnetic switch with a mainstream linear mechanical switch feel? --TTC Magneto Switch.
Main features, sealed bottom, long springs, switch mandrel advance bottoming. TTC Magneto switch, the use of the center of the magnetic position structure scheme, the magnet is built in the switch mandrel. At the same time, the bottom case has been bottomed out, so that the switch mandrel can be bottomed out, and the total key stroke is shortened to 3.5mm accordingly. The sealed bottom + switch mandrel touchdown, in addition to a stronger sense of confirmation of the touchdown (similar to the advance touchdown linear mechanical switch), the sound is also significantly more focused.
In addition, equipped with a 21mm lengthening spring, 35g initial pressure, full touchdown pressure, relatively light, press feel, enough return force, and touchdown dry, crisp, no longer soft feeling. Some other structural features, with transparent PC top cover and one-piece light guide column.
And due to the magnetic switch characteristics, there is no need for a spring structure, and there is no spring sound. Factory lubrication can be seen at the end of the spring, and the switch press stability and smoothness performance is excellent. It adopts the square enclosure switch mandrel, which is very stable, and the wobble is really small.
Among other things, it adopts a collocation structure for the switch mandrel, which is combined by two parts. The lower part, affecting the bottoming out with rebound impact, so you can customize the material to control the sound as well as the feel, such as the top of the soft spring structure, replaced with soft rubber, which is not a semi-silent magnetic switch?
About compatibility, in addition to have to be the center magnetic position, Hall sensor, but also the magnetic pole direction match to use. And if the PCB, did not open two foot holes, cut off the two small feet of the shaft body and then installed on it, is also possible.
In short, TTC this one Magneto switch, assembled switch mandrel,structure, high customizability. Long spring, sealed bottom, switch mandrel bottom, performance in the hand, rebound with the hand, touch bottom dry, strong sense of confirmation, a change in the magnetic switch in the past soft and flimsy inherent impression, very close to the current mainstream advance touch bottom of the feel of the linear mechanical switch! But in principle, it is a magnetic switch, support for custom triggering, extremely functional.
Magnetic switch, gaming, and RGB are inextricably linked, right? So here comes the brighter RGB Magneto shaft! With a fully translucent housing plus an integrated lens, there will be a noticeable increase in brightness.
As for the construction, it's the same as the Magneto switch, so is this a simple case change?
In fact, by comparing the parameters, it will be found that the total key travel of the RGB Magneto switch is reduced by 0.1mm while the tolerance of the magnetic switch volume has also been minimized: 640±50GS (pce1.2mm) 480±50GS (pcB1.6mm).
What is the concept of ±50?
The current industry standard is ±80, however ±50 is equivalent to the existence of T0. The Magneto switch and RGB Magneto switch have the same compatibility structure and the same magnetic orientation. Therefore, keyboards that are compatible with the Magneto switch are also compatible with the RGB Magneto switch.
